Guide

How to fit a plug-in solar kit

From the box to making electricity in an afternoon.

Fitting a plug-in solar kit is a satisfying afternoon’s job. Every kit is slightly different, so always follow your kit’s own instructions. Here’s how it works in general.

1. Do the 60-second check

Look at your fuse board and make sure the RCD switch says Type A, F or B. If it says Type AC, get an electrician to swap it before you plug in. Remember the rules allow one plug-in kit per home.

2. Pick your spot

Choose the sunniest place you can: south-facing is best, with south-east and south-west close behind. Avoid shade from trees, fences and neighbouring buildings. Make sure the kit’s cable will reach your socket directly, without an extension lead.

3. Unbox and check

Lay everything out and check it against the parts list. You should have the panels, the microinverter, the mount, the cables and the fixings.

4. Build the mount

Assemble the mount following the instructions, and set the angle if your mount adjusts. On a wall or railing, use the fixings supplied and make sure everything is tight. Panels catch the wind, so a secure fixing matters.

5. Fit the panels and microinverter

Secure the panels to the mount and attach the microinverter where the instructions show. Connect the panel cables to the microinverter. The connectors click together and only fit one way.

6. Plug in

Run the cable to your socket, plug in and switch on. Most kits have a light or an app that shows when they’re working. On a sunny day you’ll see power coming in within minutes.

7. Register your kit

Register it online through the Energy Networks Association’s official portal. It’s free and takes about five minutes.

Safety first

Only work at a height you can reach safely, and never modify the kit: the approval covers the complete kit exactly as sold. If anything doesn’t look right, stop and ask an electrician.